New Masonry Surface
New exterior masonry surfaces – allow wall to dry out thoroughly. Remove dirt, dust, grease and other contaminants before painting.
Previously Painted Surfaces
Remove all loose materials, unstable paint film, grease, etc. Leave it overnight, then wash with clean water. Dry the surface thoroughly before painting.
新墙面表面处理：
新的外部砖石表面 – 让墙壁彻底干燥。 涂漆前清除污垢，灰尘，油脂和其他污染物。
旧墙面表面处理：
去除所有松散的材料，不稳定的漆膜，油脂等。将其放置过夜，然后用清水洗净。 涂漆前彻底擦干表面。
Stir thoroughly before use. Product is supply ready to use. If necessary, not more than 10% water.
使用前搅拌均匀即可使用。如需要，可加入不超过10%的水。
1.Keep container tightly closed.
2.Keep out of reach children or away from food and drink.
3.Ensure good ventilation during application and drying.
4.When applying paint, it is advisable to wear eye protection.
5.In case of contact with eyes rinse with plenty of water immediately and seek medical advice.
6.Remove splashes from skin by using soap or water.
7.Paint must always be stored in a cool place.
8.When delivering paint, care must be taken. Always keep container in a secure upright.
9.Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.
1.保持容器密闭。
2.远离儿童或远离食物和饮料。
3.在使用和干燥过程中确保良好的通风。
4.涂漆时，建议戴上护眼镜。
5.如果接触眼睛立即用大量清水冲洗并就医。
6.用肥皂或水清除皮肤上的飞溅物。
7.必须将货物存放在阴凉处。
8.运送货物时必须小心。确保容器保持在直立的安全状态。
9.根据相应的环境质量法规，清除任何油漆废物。
